Goldshell CK6 Firmware - Buy GoldShell Miner

Download the newest Goldshell official firmware – Goldshell CK6 firmware now.

GoldShell recently updated the firmware of the GoldShell CK6 miner.

The Goldshell CK6 is a Nervos Network miner. It mines the Eaglesong algorithm, with a maximum hashrate of 19.3 Th/s and a power consumption of 3300 W.

The stability of the miner will be greatly improved after the upgrade is completed. It is recommended that miners who have not upgraded CK6 complete this upgrade as soon as possible to improve mining efficiency.

*No need to upgrade the firmware if everything is fine.

*Warning! Do not turn off the power and operate the miner when starting the firmware upgrade.

Goldshell CK6 Firmware 2.2.1

How to Upgrade Goldshell CK6 Firmware

Unlock your Goldshell miner.
The miner will begin the firmware upgrade automatically if you go to the [System] page, choose and upload the new firmware file into the upgrade firmware path, and then click the [Update] button.

Pool and network settings will remain in place after the upgrade is finished.

It will take five minutes to update the firmware. During this time, make sure the network is active and avoid turning the power off.

*Note：If you don’t encounter any problems, we encourage you to use old firmware.

FAQs

Is a firmware upgrade necessary?

No. If your miner is working normally, the firmware upgrade isn’t necessary.

Is there a firmware that can increase or lower the fan RPM?

There is no way to manually change the fan speed at present; in fact, the fan speed is automatically adjusted according to the miner’s temperature.

Where can I find the history versions of firmware?

Check the information above, we’ve updated all the avaliable firmware.

After an upgrade, if the miner doesn’t work normally, what should I do?

You can try to downgrade to its original version. Check the history versions of firmware above.
If the downgrade doesn’t work, please consult the seller to get this resolved.