The HNS&SC algorithm switching on Goldshell HS5 is demonstrated in this tutorial.
Model HS5 from Goldshell mining 2 algorithms (Handshake, Blake2B-Sia) with a maximum hashrate of 5.4Th/s for a power consumption of 2650W.
Here is a step-by-step guide on how to switch to Goldshell HS5 Handshake and Blake2B-Si algorithm.
1.Enter the background of the Goldshell miner
2.Upgrade the dual mining firmware
When beginning the upgrade, be careful not to turn off the power and use the miner. To report the miner’s IP, kindly wait five to ten minutes before pressing the IP button. You have finished the upgrade if you can disappear into the background.
Visit our firmware page
After the upgrade, go back to the miner’s home page, where the updated version number will be visible at the bottom of the page. The following figure uses the Goldshell HS5 miner as an example
3.Switch algorithm, select the corresponding algorithm and add the corresponding mining pool to start mining
Note: Please remove any additional mining pools and set the mining pool to match the algorithm.
