In the manual, you will find detailed instructions on how to set up and use the Goldshell KD-BOX Pro, including step-by-step guides for hardware and software installation, pool and wallet configuration, and monitoring and troubleshooting your device. The manual also includes specifications for the device, as well as information on power consumption, operating temperatures, and more.
Goldshell KD BOX Pro also uses the Kadena algorithm to mining KDA, with a maximum hashrate of 2.6Th/s and power consumption of 230W. The power consumption ratio is as low as 0.088j/Gh.
Goldshell KD BOX Pro is a home Asic mining machine, the internal structure is as simple as possible, so that the overall volume of the product is reduced as much as possible, and the space utilization efficiency is improved.
Whether you are a novice miner looking to get started with the KD-BOX Pro or an experienced miner looking to optimize your mining operations, the manual provides valuable information that can help you achieve your goals.
Table of Contents
1. Check the Goldshell KD-BOX Pro
- Perform an initial inspection prior to starting the Goldshell ASIC miner.
- Verify the condition of the fans and whether the miner is deformed or otherwise damaged.
- Inspect the miner for any unusual noises and look for any heat sinks that may be coming loose.
- If the aforementioned situation occurs, please take a photo first before submitting a support ticket on the Goldshell website.
2. Prepare Network Cable and Power Supply
- Purchase the Goldshell power supply. 4 Box miners can be powered by it.
OR
- 80 Power supply PLUS GOLD, minimum requirements: 500W ATX Gold PSU, output current 12V 25A or more.
- To avoid short circuits, remember to plug the power supply in the proper direction.
3. Connect Power Supply and Network Cable
- Correct status of indicator
- Power indicator: the red and green lights flash when connected, the red light is off for a short time, and the green light is always on.
- Network indicator: the red and green lights flash when connected, the red light is off for a short time, and the green light keeps flashing.
4. Get the IP of the Miner and Entering the Miner’s Dashboard
Enter find.goldshell.com into your browser. We advise using Google Chrome.
To access the device dashboard, click the corresponding icon in the settings column.
5. Unlock Goldshell KD-BOX Pro
- In the top right corner of the page, you can change the language and unlock the miner.
- The password must be entered after clicking the [unlock] button in the page’s upper right corner. Miner’s factory password is [123456789].
6. Pool Setting
- Unlock your Goldshell KD-BOX Pro.
- Visit the [Miner] page and [Pool Seeting], find the [Add] and click
- Your choice of pool address and port number should be entered along with the miner’s username and password. The Dxpool is used as an illustration pool in the above diagram.
- Wait for the pool to connect successfully, then go to the [Home] page and look at the chart. The pool configuration is successful if you find a hashrate curve.
*Please follow the safety instructions or your warranty may be void.
