GoldShell recently updated the firmware of the GoldShell Mini-DOGE miner.
Download the newest Goldshell Mini-DOGE firmware now.
The Goldshell Mini-DOGE is a Litecoin and Dogecoin merge miner (it can mine both coins at the same time). It mines the Scrypt algorithm, with a maximum hashrate of 185 Mh/s and a power consumption of 233 W.
The stability of the miner will be greatly improved after the upgrade is completed. It is recommended that miners who have not upgraded Goldshell Mini-DOGE complete this upgrade as soon as possible to improve mining efficiency.
*No need to upgrade the firmware if everything is fine.
*Warning! Do not turn off the power and operate the miner when starting the firmware upgrade.
Here are the old versions of Goldshell Mini-DOGE firmware.
How to Upgrade Goldshell Mini-DOGE Firmware
- Unlock your Goldshell miner.
- The miner will begin the firmware upgrade automatically if you go to the [System] page, choose and upload the new firmware file into the upgrade firmware path, and then click the [Update] button.
Pool and network settings will remain in place after the upgrade is finished.
It will take five minutes to update the firmware. During this time, make sure the network is active and avoid turning the power off.
*Note：If you don’t encounter any problems, we encourage you to use old firmware.
FAQs
Is a firmware upgrade necessary?
No. If your miner is working normally, the firmware upgrade isn’t necessary.
Is there a firmware that can increase or lower the fan RPM?
There is no way to manually change the fan speed at present; in fact, the fan speed is automatically adjusted according to the miner’s temperature.
Where can I find the history versions of firmware?
Check the information above, we’ve updated all the avaliable firmware.
After an upgrade, if the miner doesn’t work normally, what should I do?
- You can try to downgrade to its original version. Check the history versions of firmware above.
- If the downgrade doesn’t work, please consult the seller to get this resolved.
Can I update the firmware of MINI DOGE to MINI DOGE PRO and make it work like a MINI DOGE PRO?
No, there is no way to change the miner type through firmware. Burning the firmware will not make it another miner.